Explore how Hikvision’s MinMoe Face Recognition Terminals and Iris Recognition Terminals are redefining access control and security through advanced 3D recognition, affordable reconstruction techniques, and thermal imaging. Discover their potential in enhancing accuracy, security, and convenience.

In the realm of access control and attendance management, Hikvision continues to lead the way with groundbreaking innovations. The journey of authorized access has evolved significantly, from traditional methods like keys, pin codes, cards, and fingerprints to the exciting era of advanced biometric recognition. Among these innovations, face recognition has emerged as a popular choice, primarily due to its touch-free convenience. However, as technology advances, Hikvision is not content to stop at convenience alone. They are pushing the boundaries of what’s possible with their MinMoe Face Recognition Terminals and Iris Recognition Terminals, using advanced deep learning algorithms and practical features to redefine access control and time attendance solutions.

Ultra Series

*************************************

HIKVISION DS-K1T671TM-3XF Ultra Face Recognition Terminals

 

DS-K1T671TM-3XF

Ultra Face Recognition Terminals

• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
• Recognition distance: 0.3 to 2 m
• Face mask detection
• Displays temperature measurement results on the authentication page
• 7-inch LCD touch screen,2 Mega pixel wide-angle lens
• Built-in Mifare card reading module
• Face recognition duration ＜ 0.2 s/User
• face recognition accuracy rate ≥ 99%
• 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity

 

HIKVISION DS-K1T671TMFW Ultra Face Recognition Terminals

DS-K1T671TMFW

Ultra Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in M1 card reading module
• Face recognition distance (without face mask): 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• Max. 50,000 faces capacity, Max. 5000 fingerprints capacity, and Max. 50,000 cards
• Two-way audio with client software,indoor station, and main station
• Supports TCP/IP,Wi-Fi
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol
• IP65

 

HIKVISION DS-K1T671TMW Ultra Face Recognition Terminals

 

DS-K1T671TMW

Ultra Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in M1 card reading module
• Face recognition distance (without face mask): 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• Max. 50,000 faces, Max. 50,000 cards
• Two-way audio with client software,indoor station, and main station
• Supports TCP/IP,Wi-Fi
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol
• IP65

 

HIKVISION DS-K1T672E Ultra Series Wall-Mounted Face Access Terminal

DS-K1T672E

Ultra Series Wall-Mounted Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• 7-inch touch screen with bezel-less design
• Presents card on the screen to authenticate card permission
• Face recognition. Distance: 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• 50,000 face capacity, 50,000 card capacity（EM card）, and 50,000 event capacity
• Supports wiegand protocol and RS-485 protocol
• Two-way audio with indoor station and main station
• Supports ISAPI and ISUP5.0 protocol
• Configuration via the web client

HIKVISION DS-K1T672E Ultra Series Wall-Mounted Face Access Terminal

DS-K1T672E

Ultra Series Wall-Mounted Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• 7-inch touch screen with bezel-less design
• Presents card on the screen to authenticate card permission
• Face recognition. Distance: 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• 50,000 face capacity, 50,000 card capacity（EM card）, and 50,000 event capacity
• Supports wiegand protocol and RS-485 protocol
• Two-way audio with indoor station and main station
• Supports ISAPI and ISUP5.0 protocol
• Configuration via the web client

 

HIKVISION DS-K1T672M Ultra Series Wall-Mounted Face Access Terminal

DS-K1T672M

Ultra Series Wall-Mounted Face Access Terminal

• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• 7-inch touch screen with bezel-less design
• Presents card on the screen to authenticate card permission
• Face recognition distance: 0.3 m to 3 m
• 50,000 face capacity, 50,000 card capacity, and 50,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Connects to one external card reader via RS-485 protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Two-way audio with indoor station and master station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Configuration via the web client
• Remotely opens door and starts live view via Hik-Connect
• Supports ISAPI and EHome 5.0 protocol
• Supports multiple languages: English, Thai, Russian, Spanish, Arabic, Indonesian, and Vietnamese
• Self-defined voice prompt of authentication result

 

HIKVISION DS-K1T672MW Ultra Series Wall-Mounted Face Access Terminal

DS-K1T672MW

Ultra Series Wall-Mounted Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• 7-inch touch screen with bezel-less design
• Presents card on the screen to authenticate card permission
• Face recognition. Distance: 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%50,000 face capacity, 50,000 card capacity（M1 card）, and 50,000 event capacity
• Supports wiegand protocol and RS-485 protocol
• Two-way audio with indoor station and main station
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

 

HIKVISION DS-K1T673TDWX Ultra Series Face Access Terminal

DS-K1T673TDWX

Ultra Series Face Access Terminal

• 7-inch LCD touch screen,2 Mega pixel wide-angle lens
• Recognition distance: 0.3 to 3 m
• Face recognition duration ＜ 0.2 s/User
• Face recognition accuracy rate ≥ 99%
• Built-in Mifare card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face mask detection
• 100,000 face capacity, 10,000 fingerprint capacity (With fingerprint module), 500,000 card capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP (IPv4 and IPv6)
• Supports single person and multiple people (Up to 5 people) recognition

 

HIKVISION DS-K1T680D-E1 Ultra Series Wall-Mounted Face Access Terminal

DS-K1T680D-E1

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, and PoE
• Two-way audio with indoor station and main station
• Configuration via the web client and mobile client
• Customizes attendance status name

 

HIKVISION DS-K1T680DFG Ultra Series Wall-Mounted Face Access Terminal

DS-K1T680DFG

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), 10,000 fingerprint capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, 3G/4G
• Two-way audio with indoor station and master station
• Configuration via the web client and mobile client
• Customizes attendance status name

 

HIKVISION DS-K1T680DFW Ultra Series Wall-Mounted Face Access Terminal

DS-K1T680DFW

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), 10,000 fingerprint capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, Wi-Fi
• Two-way audio with indoor station and main station
• Configuration via the web client and mobile client
• Customizes attendance status name

HIKVISION DS-K1T680DG Ultra Series Wall-Mounted Face Access Terminal

DS-K1T680DG

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, 3G/4G
• Two-way audio with indoor station and main station
• Configuration via the web client and mobile client
• Customizes attendance status name

DS-K1T680DW

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, Wi-Fi
• Two-way audio with indoor station and main station
• Configuration via the web client and mobile client
• Customizes attendance status name

**3D Face Recognition: A New Dimension in Security**

In recent years, 3D face recognition has garnered significant attention, and for good reason. This technology uses stereoscopic images captured from 3D scanners to create precise three-dimensional models of individuals’ faces. Unlike traditional 2D images, 3D recognition accounts for depth and facial features that go beyond the scope of a flat image. This makes it incredibly reliable, capable of overcoming challenges posed by varying lighting conditions, facial expressions, and poses.

MinMoe: Hikvision’s DS-K1T341CMFW Next-Gen Face Recognition Terminals Now Available

While 3D scanners were once prohibitively expensive for most applications, Hikvision has opened up new possibilities. They’ve introduced cost-effective alternatives for capturing 3D facial data, making this technology accessible and popular among users.

**Advanced Reconstruction Techniques: Affordable 3D Recognition**

Hikvision’s MinMoe terminals use ingenious methods for capturing 3D facial images without breaking the bank. They leverage multiple 2D cameras to collect images and reconstruct a 3D model. Additionally, these terminals employ deep learning-based reconstruction techniques by projecting grid light onto a subject’s face and capturing the reflected pattern. Sophisticated deep-learning algorithms then convert these reflections into precise 3D facial images.

The Apple FACE ID system offers a prime example of this approach. It combines an infrared camera and dot projector to accurately map facial depth and shape, comparing it to a pre-stored image for identity verification. As 3D facial recognition continues to advance, there’s significant potential to enhance accuracy and reduce false positives. The introduction of deep learning algorithms like convolutional neural networks promises even greater accuracy and reliability.

**Face Recognition at a Distance: Extending the Reach of Security**

As technology progresses, facial recognition systems have expanded their capabilities to identify individuals at a distance. “Face recognition at a distance” has become increasingly popular due to its adaptability across various applications, especially in access control and surveillance. These systems rely on active-vision face recognition technologies, incorporating cutting-edge facial recognition algorithms and artificial intelligence (AI).

 

HIKVISION DS-K1T320EFWX Value Series Face Access Terminal

DS-K1T320EFWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321EFWX Value Series Face Access Terminal

DS-K1T321EFWX

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

 

HIKVISION DS-K1T321EFX Value Series Face Access Terminal

DS-K1T321EFX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

 

HIKVISION DS-K1T321EWX Value Series Face Access Terminal Value Series Face Access Terminal

DS-K1T321EWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321EX Value Series Face Access Terminal

DS-K1T321EX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321MFWX Value Series Face Access Terminal

DS-K1T321MFWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321MFX Value Series Face Access Terminal

DS-K1T321MFX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321MWX Value Series Face Access Terminal

DS-K1T321MWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321MX Value Series Face Access Terminal

DS-K1T321MX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T342DX Value Series Face Access Terminal

DS-K1T342DX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in Mifare/Felica/DESfire card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342EFWX Value Series Face Access Terminal

DS-K1T342EFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342EWX Value Series Face Access Terminal

DS-K1T342EWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP、Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1T342EWX Value Series Face Access Terminal

DS-K1T342EWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP、Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1T342EX Value Series Face Access Terminal

DS-K1T342EX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

 

HIKVISION DS-K1T342MFWX Value Series Face Access Terminal

 

DS-K1T342MFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342MFX Value Series Face Access Terminal

 

DS-K1T342MFX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342MWX Value Series Face Access Terminal

DS-K1T342MWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T321MX Value Series Face Access Terminal

DS-K1T321MX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

DS-K1T342EFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342EWX Value Series Face Access Terminal

DS-K1T342EWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP、Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1T342EX Value Series Face Access Terminal

DS-K1T342EX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T342MFWX Value Series Face Access Terminal

DS-K1T342MFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342MFX Value Series Face Access Terminal

 

DS-K1T342MFX

 

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

DS-K1T342MWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1T342MX Value Series Face Access Terminal

DS-K1T342MX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1A340FWX Value Series Face Access Terminal

 

DS-K1A340FWX

Value Series Face Access Terminal

• Local time attendance; Remote configuration via web browser
• 4.3-inch touch screen and 2 MP camera
• Face anti-spoofing; Face recognition distance: 0.3m to 1.5m
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Deep learning algorithm
• 1500 face capacity, 3000 fingerprint capacity, and 300,000 attendance records
• Supports ISAPI, ISUP5.0
• Export registered face pictures and events from device via USB interface
• Manage, search and set device data after logging in the device locally

 

HIKVISION DS-K1A340FX Value Series Face Access Terminal

 

DS-K1A340FX

Value Series Face Access Terminal

• Local time attendance
• 4.3-inch touch screen and 2 MP camera
• Face anti-spoofing; Face recognition distance: 0.3m to 1.5m
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Deep learning algorithm
• 1500 face capacity, 3000 fingerprint capacity, and 300,000 attendance records
• Export registered face pictures and events from device via USB interface
• Manage, search and set device data after logging in the device locally

 

HIKVISION DS-K1A340WX Value Series Face Access Terminal

DS-K1A340WX

Value Series Face Access Terminal

• Local time attendance; Remote configuration via web browser
• 4.3-inch touch screen and 2 MP camera
• Face anti-spoofing; Face recognition distance: 0.3 m to 1.5 m
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Deep learning algorithm
• 1500 face capacity, and 300,000 attendance records
• Supports ISAPI, ISUP5.0
• Export registered face pictures and events from device via USB interface
• Manage, search and set device data after logging in the device locally

HIKVISION DS-K1A340X Value Series Face Access Terminal

DS-K1A340X

Value Series Face Access Terminal

• Local time attendance
• 4.3-inch touch screen and 2 MP camera
• Face anti-spoofing; Face recognition distance: 0.3 m to 1.5 m
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Deep learning algorithm
• 1500 face capacity, and 300,000 attendance records
• Export registered face pictures and events from device via USB interface
• Manage, search and set device data after logging in the device locally

 

HIKVISION DS-K1T320EFWX Value Series Face Access Terminal

DS-K1T320EFWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card, and PIN, etc
• Supports EM card
• Max. 500 faces, 1,000 cards, 1,000 fingerprints and 100,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

 

DS-K1T320MFWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card, and PIN, etc.
• Supports Mifare card
• Max. 500 faces, 1,000 cards, 1,000 fingerprints and 100,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

 

HIKVISION DS-K1T320MFX Value Series Face Access Terminal

DS-K1T320MFX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication modes, including face, fingerprint, card, and PIN, etc.
• Supports Mifare card
• Max. 500 faces, 1,000 cards, 1,000 fingerprints and 100,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

DS-K1T320MWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card, and PIN, etc.
• Supports Mifare card
• Face recognition duration < 0.2 s/User
• Max. 500 faces, 1,000 cards, and 100,000 events
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

DS-K1T320MX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication modes, including face, card, and PIN, etc.
• Supports Mifare card
• Max. 500 faces, 1,000 cards, and 100,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

HIKVISION DS-K1T331 Value Series Face Access Terminal

DS-K1T331

Value Series Face Access Terminal

• Max.1000 faces capacity
• Supports TCP/IP communication
• Configuration via the web client
• Face Recognition Access Control Terminal, 3.97-inch LCD touch screen,2 Mega pixel wide-angle lens
• Supports ISUP5.0, ISAPI

HIKVISION DS-K1T331W Value Series Face Access Terminal

DS-K1T331W

Value Series Face Access Terminal

• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face Recognition Access Control Terminal, 3.97-inch LCD touch screen,2 Mega pixel wide-angle lens
• Max.1000 faces capacity
• Configuration via the web client
• Supports TCP/IP,Wi-Fi communication
• Supports ISUP5.0, ISAPI

HIKVISION DS-K1T341AM Value Series Face Access Terminal

DS-K1T341AM

Value Series Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Max.3000 faces capacity and Max.3000 cards
• Supports TCP/IP
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in M1 card reading module
• Supports ISUP5.0, ISAPI
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Two-way audio with client software, indoor station, and main station
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%; IP65

HIKVISION DS-K1T341AMF Value Series Face Access Terminal

DS-K1T341AMF

Value Series Face Access Terminal

• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Max.3000 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in M1 card reading module
• Two-way audio with client software, indoor station, and main station
• Supports TCP/IP
• Supports ISUP5.0, ISAPI
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%; IP65

HIKVISION DS-K1T341CM Value Series Face Access Terminal

DS-K1T341CM

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, and 150,000 event capacity
• Multiple authentication modes, including face, and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

HIKVISION DS-K1T341CMF Value Series Face Access Terminal

DS-K1T341CMF

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, 3,000 fingerprint capacity and 150,000 event capacity
• Multiple authentication modes, including face, fingerprint and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

HIKVISION DS-K1T341CMFW Value Series Face Access Terminal

DS-K1T341CMFW

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, 3,000 fingerprint capacity and 150,000 event capacity
• Multiple authentication modes, including face, fingerprint and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

HIKVISION DS-K1T341CMW Value Series Face Access Terminal

DS-K1T341CMW

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, and 150,000 event capacity
• Multiple authentication modes, including face, and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

HIKVISION DS-K1T341CMW Value Series Face Access Terminal

DS-K1T341CMW

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, and 150,000 event capacity
• Multiple authentication modes, including face, and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

 

HIKVISION DS-K1T342DWX Value Series Face Access Terminal

DS-K1T342DWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens, Built-in Mifare/Felica/DESfire card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

DS-K1T343EFWX

DS-K1T343EFX

DS-K1T343EWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP、Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T343EX Value Series Face Access Terminal

DS-K1T343EX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T343MFWX Value Series Face Access Terminal

 

DS-K1T343MFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T343MFX Value Series Face Access Terminal

DS-K1T343MFX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

 

HIKVISION DS-K1T343MWX Value Series Face Access Terminal

DS-K1T343MWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T343MX Value Series Face Access Terminal

DS-K1T343MX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

 

 

 

Pro Series

---

HIKVISION DS-K1T642E Pro Series Face Recognition Terminals

DS-K1T642E

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Supports ISAPI and ISUP5.0 protocol
• Configuration via the web client

 

HIKVISION DS-K1T642EF Pro Series Face Recognition Terminals

DS-K1T642EF

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max. 5000 fingerprints capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642EFW Pro Series Face Recognition Terminals

DS-K1T642EFW

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max. 5000 fingerprints capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642EW Pro Series Face Recognition Terminals

DS-K1T642EW

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642M Pro Series Face Recognition Terminals

DS-K1T642M

Pro Series Face Recognition Terminals

• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Max.6,000 faces capacity, Max.10,000 cards
• Two-way audio with client software, indoor station, and master stationSupports TCP/IP；Supports Ehome5.0, ISAPI
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 3 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%；

HIKVISION DS-K1T642MF Pro Series Face Recognition Terminals

DS-K1T642MF

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max. 5000 fingerprints capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642MFW Pro Series Face Recognition Terminals

DS-K1T642MFW

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max. 5000 fingerprints capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642MW Pro Series Face Recognition Terminals

 

DS-K1T642MW

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6,000 face capacity, Max. 10,000 card capacity, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T671M Pro Face Access Terminal

DS-K1T671M

Pro Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in Mifare card reading module
• Face recognition distance (without face mask): 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• Max.6000 faces, Max.6000 cards
• Two-way audio with client software, indoor station, and mainstation
• Supports TCP/IP
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol
• IP65

 

HIKVISION DS-K1T671MF Pro Face Access Terminal

DS-K1T671MF

Pro Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in M1 card reading module
• Face recognition distance (without face mask): 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• Max.6000 faces, Max.6000 cards and Max. 5000 fingerprints
• Two-way audio with client software,indoor station, and main station
• Supports TCP/IP
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol
• IP65

HIKVISION DS-K1T673DWX Pro Face Access Terminal

DS-K1T673DWX

Pro Face Access Terminal

• 7-inch LCD touch screen,2 Mega pixel wide-angle lens
• Recognition distance: 0.3 to 3 m
• Face recognition duration ＜ 0.2 s/User
• Built-in Mifare card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face recognition accuracy rate ≥ 99%
• Face mask detection
• 10,000 face capacity, 10,000 fingerprint capacity (With fingerprint module), 50,000 card capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP (IPv4 and IPv6)
• Supports single person and multiple people (Up to 5 people) recognition

 

HIKVISION DS-K1T673DX Pro Face Access Terminal

DS-K1T673DX

Pro Face Access Terminal

• 7-inch LCD touch screen,2 Mega pixel wide-angle lens
• Recognition distance: 0.3 to 3 m
• Face recognition duration ＜ 0.2 s/User
• Face recognition accuracy rate ≥ 99%
• Built-in Mifare card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face mask detection
• 10,000 face capacity, 10,000 fingerprint capacity (With fingerprint module), 50,000 card capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP (IPv4 and IPv6)
• Supports single person and multiple people (Up to 5 people) recognition

HIKVISION DS-K1TA70MI-T Pro Face Access Terminal

 

DS-K1TA70MI-T

Pro Face Access Terminal

• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
• Recognition distance: 0.3 to 1.8 m
• Face mask detection
• Displays temperature measurement results on the authentication page
• 7-inch LCD touch screen,2 Mega pixel wide-angle lens Built-in Mifare card reading module
• Face recognition duration ＜ 0.2 s/User
• Face recognition accuracy rate ≥ 99%
• 6000 face capacity, 6000 card capacity, and 100,000 event capacity

**Elevating Access Control: Hikvision’s Face Recognition Innovation**

Facial recognition technology has evolved significantly in recent years, transforming the landscape of access control and security. Hikvision, a global leader in innovative security solutions, is at the forefront of this transformation with their cutting-edge face recognition innovations. In this article, we will delve into the intricacies of facial recognition and explore how Hikvision’s technology is redefining access control.

**The Anatomy of Facial Recognition**

Facial recognition is a multifaceted process that combines advanced hardware and software components to identify individuals in digital images or videos. This process typically involves four key steps:

**1) Face Detection:** The journey of facial recognition commences with face detection. This step involves locating a human face within an image or video. Hikvision employs specialized facial recognition software equipped with algorithms that identify crucial facial features. Among the various techniques used for face detection, the Viola-Jones algorithm stands out as the most popular choice. It utilizes a set of Haar cascades to detect faces with remarkable accuracy.

**2) Facial Feature Extraction:** Once a human face is identified, the next step is facial feature extraction. This involves the extraction of vital facial characteristics, such as the eyes, nose, and mouth. Hikvision’s proprietary facial recognition algorithms and software play a pivotal role in this phase. These algorithms meticulously pinpoint key points on the face, creating a unique facial map that serves as the foundation for subsequent analysis and biometric identification.

**3) Face Verification/Identification:** With the facial feature map in hand, the system compares it against existing facial maps stored in a database. Hikvision’s biometric facial recognition algorithms come into play at this stage. These algorithms determine whether the detected face matches any of the stored maps, facilitating the processes of verification (1:1) or identification (1:N). Hikvision employs a range of approaches for facial verification and identification, including Holistic Matching, Local Feature Analysis (LFA), Elastic Bunch Graph Matching (EBGM), and more.

**4) Decision-Making:** The final stage of facial recognition involves decision-making. Once the algorithm determines whether a face is present, it makes informed decisions based on predefined criteria. These decisions could encompass granting or denying access, displaying relevant user information, and more. In addition to these crucial steps, Hikvision places a significant emphasis on Face Liveness Detection. This technology acts as a robust defense mechanism against spoofing attempts. It confirms the vitality of the person in front of the camera, ensuring that the system remains secure against fraudulent use of images, masks, or videos. Algorithms scrutinize factors like eye blinking, head movement, and facial expressions to actively thwart spoofing attempts and maintain the integrity of the security system.

**Hikvision’s Vision for Access Control**

Hikvision’s dedication to innovation is evident in their comprehensive approach to facial recognition. Their state-of-the-art solutions not only excel in the fundamental steps of facial recognition but also set new standards in accuracy and security.

By continuously refining their algorithms and hardware, Hikvision is reshaping access control and security systems. Their commitment to providing advanced, touch-free access solutions underscores their role as a pioneer in the industry.

As technology continues to advance, Hikvision’s face recognition innovations are poised to play an increasingly significant role in enhancing security and access control across various sectors.

In conclusion, Hikvision’s relentless pursuit of innovation in facial recognition technology is elevating access control and security to new heights. With a keen focus on accuracy, security, and user experience, Hikvision is leading the way in shaping the future of access control.

Explore how Hikvision’s facial recognition technology is revolutionizing access control and security by delving into the intricacies of the facial recognition process. Discover their commitment to innovation and how they’re reshaping the landscape of security solutions.

HIKVISION DS-K1T681DBWX Face Recognition Terminals

DS-K1T681DBWX

Face Recognition Terminals

• Android 11 operation system
• 8-inch LCD touch screen, 2 MP wide-angle lens
• Face recognition duration ＜ 0.2 s/User, face recognition accuracy rate ≥ 99%
• Built-in M1 card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face mask detection
• 100,000 face capacity, 10,000 fingerprint capacity (with fingerprint module), 500,000 card capacity, and 500,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP
• Supports face recognition of single person and multiple people (up to 5 people)
• Recognition distance: 0.3 to 3 m

 

HIKVISION DS-K1T681DBX Face Recognition Terminals

DS-K1T681DBX

Face Recognition Terminals

• Android 11 operation system
• 8-inch LCD touch screen, 2 MP wide-angle lens
• Face recognition duration ＜ 0.2 s/User, face recognition accuracy rate ≥ 99%
• Built-in M1 card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face mask detection
• 100,000 face capacity, 10,000 fingerprint capacity (with fingerprint module), 500,000 card capacity, and 500,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP
• Supports face recognition of single person and multiple people (up to 5 people)
• Recognition distance: 0.3 to 3 m

 

HIKVISION DS-K5604A-3XF/V Ultra Face Recognition Terminals

DS-K5604A-3XF/V

Ultra Face Recognition Terminals

• Plug & play
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
• Recognition distance: 0.3 to 2 m
• Face mask detection
• Displays temperature measurement results on the authentication page
• 10.1-inch LCD touch screen,2 Mega pixel wide-angle lens
• 50,000 face capacity and 100,000 event capacity
• Face recognition duration ＜ 0.2 s/User
• Face recognition accuracy rate ≥ 99%

DS-K5671-ZH

Face Recognition Module For Turnstile

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition terminal for turnstile
• Built-in IO output or Wiegand output to communicate with the third-party turnstile
• 7 inch LCD Touch Screen, 2 M camera
• Max. 50,000 faces, and Max. 100,000 events
• Face recognition distance: 0.3 m to 3 m; Face recognition duration ＜ 0.2 s/User; Accuracy rate ≥ 99%
• TCP/IP, Wi-Fi communication
• Remote live view via RTSP protocol
• Indoor use

HIKVISION DS-K5671-ZU Face Recognition Module For Turnstile

DS-K5671-ZU

Face Recognition Module For Turnstile

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition terminal for turnstile
• Built-in IO output or Wiegand output to communicate with the third-party turnstile
• 7 inch LCD Touch Screen, 2 M camera
• Max. 50,000 faces, and Max. 100,000 events
• Face recognition distance: 0.3 m to 3 m; Face recognition duration ＜ 0.2 s/User; Accuracy rate ≥ 99%
• TCP/IP, Wi-Fi communication
• Remote live view via RTSP protocol
• IP65

HIKVISION DS-K5671-ZV Face Recognition Module For Turnstile

DS-K5671-ZV

Face Recognition Module For Turnstile

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition terminal for turnstile
• Built-in IO output or Wiegand output to communicate with the third-party turnstile
• 7 inch LCD Touch Screen, 2 M camera
• Max. 50,000 faces, and Max. 100,000 events
• Face recognition distance: 0.3 m to 3 m; Face recognition duration ＜ 0.2 s/User; Accuracy rate ≥ 99%
• TCP/IP, Wi-Fi communication
• Remote live view via RTSP protocol
• IP65

HIKVISION DS-K5671-W Face Recognition Module For Turnstile

DS-K5671-W

Face Recognition Module For Turnstile

• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Compatible with Hikvision turnstile
• Communicates with the third-party turnstile via IO output or Wiegand
• Water-proof
• 7-inch LCD touch screen
• 2 MP wide-angle dual lens
• Adjustable supplement light brightness
• Face recognition distance: 0.3 m to 3 m
• High performance processor with deep learning algorithm
• Face capacity: 50,000
• Face recognition duration＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Multiple authentication modes
• Applies pictures to the device via TCP/IP or uploading them to the device via the USB flash drive
• Transmits and saves the comparison results and the captured pictures to the client software or others
• Stand-alone operation
• Connects to one external card reader via RS-485 protocol
• Remote live view via RTSP protocol; encoding mode: H.264
• Voice prompts
• Connects to Wiegand card reader via Wiegand protocol
• Two-way audio with client software, indoor station, and master station
• NTP, manually time synchronization, and auto synchronization
• Supports 6 attendence status, including check in, check out, break in, break out, overtime in, overtime out
• Watchdog design for protecting the device and ensuring device running properly
• Supports multiple languages: English, Spanish, Arabic, Thai, Indonesian, Russian, and Vietnamese
• Device management, log search, and parameter settings via the device
• Supports EHome 5.0 (ISUP 5.0), and ISAPI protocol
• Configuration via web browser

 

HIKVISION DS-K1A8503EF K1A8503 Value Series Fingerprint Time Attendance Terminal

DS-K1A8503EF

K1T8003 Value Series Fingerprint Time Attendance Terminal

• 2.4-inch LCD Display Fingerprint Access Control Terminal
• Communication: TCP/IP，ISUP5.0 ； 1000 users, 1000 fingerprints and Max. 100,000 event records
• Support Access Control and Time Attendance Function, Optical Fingerprint Module
• Remotely opens door via Hik-Connect mobile client；Tamper alarm.

 

HIKVISION DS-K5032-3XFD Pro Series Visitor Terminal

DS-K5032-3XFD

Pro Series Visitor Terminal

• Android operation system with dual-screen design.
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
• Recognition distance: 0.3 to 2 m
• Fast temperature measurement for visitor
• Paperless visitor enrollment.
• TCP/IP and Wi-Fi are available for networking application.
• Up to 150,000 visitor records can be stored on the device.

HIKVISION DS-K1T201AMF Pro Series Fingerprint Terminal

DS-K1T201AMF

Pro Series Fingerprint Terminal

• Fingerprint Access Control Terminal
• 2.8-inch LCD display screen
• 5000 fingerprints, 100,000 cards（Mifare card）, 300,000 events storage
• Communication via TCP/TP and Wi-Fi
• RS-485 and Wiegand interface
• ISUP5.0、ISAPI

Hikvision’s MinMoe terminals excel in this area, with the remarkable ability to accurately detect and distinguish faces in real-time, even at distances of up to 15 meters. This feature makes them ideal for bolstering security measures in public spaces, swiftly evaluating video streams. What’s more, these systems can seamlessly integrate with existing surveillance mechanisms, such as CCTV cameras, requiring minimal user involvement. As facial recognition software continues to evolve, its potential applications expand exponentially. For instance, advanced AI-driven face recognition can be integrated into security systems to safeguard facilities and possessions, providing peace of mind against theft or unwanted intruders.

**Thermal Imaging: A Game Changer in Dark Environments**

In addition to conventional facial recognition, MinMoe terminals incorporate thermal imaging technology to enhance security. These systems use infrared cameras to detect heat radiation emitted from the skin of the face, creating unique thermal signatures. This capability proves invaluable in scenarios where visible light cameras struggle due to poor lighting or facial occlusion.

MinMoe terminals excel in recognizing faces that are partially obscured, making them ideal for deployment in low-light environments. They can detect subtle temperature differences that conventional biometric facial recognition systems would miss. Importantly, these terminals can identify disguises, such as glasses, hats, or masks, as they are unable to hide the distinct heat signature of a human face. Even in complete darkness, thermal imaging technology provides a reliable method of facial recognition.

**Supporting Public Health Initiatives: Thermal Imaging in a Pandemic World**

Thermal imaging technology also plays a crucial role in public health initiatives. During the COVID-19 pandemic, it was widely used to identify individuals with elevated skin temperatures, aiding in the tracking and containment of the virus. Detecting anomalies in skin temperature, which could be indicative of illness, makes thermal imaging a valuable tool in ensuring public safety.

In conclusion, Hikvision’s innovation in face recognition is revolutionizing access control and security. The MinMoe Face Recognition Terminals and Iris Recognition Terminals incorporate advanced 3D recognition, affordable reconstruction techniques, and thermal imaging to provide unparalleled accuracy and security. As technology continues to advance, Hikvision’s solutions are poised to redefine the way we approach access control and time attendance in an ever-changing world.

 

About The Author